The manufacturer informs:

RGB+ technology consists of using RGB LEDs (three colours: red, green and blue in one LED) and combining them with specific white freshwater LEDs.
The specific channel provides the required light power and the RGB LEDs allow the aquarium to be given the desired colour tone.
This technology improves the performance of luminaires using RGBW (i.e. LEDs with four colours in one, red, green, blue and white) as having the white channel separate from the other three allows for greater light output. It also improves the performance of those using single coloured LEDs, as having the three colours very close together means that the mixture is much better, avoiding the multicolour effect or having to use a translucent cover that greatly reduces the intensity of the luminaire.

It is possible to create a light cycle with sunrise/sunset by adding a timer and it is possible to adjust the channels as there are 4 channels each comprising 10 positions and if the light goes out, the settings remain unchanged!

Supports that are fully adjustable in both length and height so that they can be adapted to aquaria longer than the luminaire and moved closer to or further away from the surface. It can also be placed on a plane inclined to the surface to produce special lighting effects.

The supplied controller allows the power of each channel to be controlled, adapting the light to the needs of the aquarium in terms of both power and colour.

A thin layer of epoxy resin protects all LED board connections so that nothing happens if the luminaire accidentally falls into water. At the same time, it allows the luminaire to be installed in places with high humidity.

The secondary lenses focus the light on the aquarium, no light is scattered around the aquarium, increases light penetration and optimises the wattage of the light.

Technical specifications:

• consumption 46w
• dimensions 600x78x16mm
• brightness: 5373 lm